
                          IP100 NDIS2 DOS Driver


(1) Installation for Microsoft Network Client,

  1. Under Microsoft Network Client subdirectory c:\NET, run SETUP.

  2. Move highlight to "Change Network Configuration", the press ENTER.

  3. Select "Add Adapter", then press ENTER.

  4. Select "Network card not shown in list below..", then press ENTER.

  5. Insert the Retech8139D driver diskette in floppy A, and specify your
     pathname A:\MSLANMAN.DOS, then press ENTER.

  6. Select "Retech8139D Fast Ethernet 10/100 Adapter", then press ENTER.

  7. Move highlight to "Network Configuration is correct" to finish the
     installation.



(2) Installation for Microsoft LAN Manager,

  1. Copy IP100.NIF from your Driver diskette (A:\MSLANMAN.DOS) to Microsoft
     LAN Manager subdirectory C:\LANMAN.DOS\DRIVERS\NIF,
     Copy IP100.DOS and PROTOCOL.INI from your Driver diskette
     (A:\MSLANMAN.DOS) to Microsoft LAN Manager subdirectory
     C:\MSLANMAN.DOS\DRIVERS\ETHERNET\IP100.

  2. Under Microsoft LAN Manager subdirectory c:\MSLANMAN.DOS, run SETUP.

  3. Move highlight to "Configuration", the press ENTER.

  4. Select "Add New Config", the press ENTER.

  5. Select "Retech8139D Fast Ethernet 10/100 Adapter", then press ENTER.

  6. Move highlight to "Network Configuration is correct" to finish the
     installation.


Histories of Release:

  ***) 1.02,  4-14-2003
       Second release.
