

          Retech8139D Fast Ethernet 10/100 Adapter
                    Novell DOS ODI Driver



Installation Procedure:
-----------------------
Before you start with the installation process, make sure that
the adapter is properly installed and configured. Make sure
that your NWCLIENT operating system is properly installed.

a. Edit the NET.CFG if you want to change some parameters.

   Sample for NET.CFG
   ------------------
   LINK DRIVER IP100
   Frame        Ethernet_802.2
   Frame        Ethernet_802.3
   Frame        Ethernet_II
   Frame        Ethernet_snap
   Protocol     IPX E0 Ethernet_802.2


b. Run the following command in the order given below and
   press <Enter>:

   LSL
   IP100
   IPXODI
   VLM

c. You can now log onto netware server.

