      **************************************************

                    RADTEK Technology, Inc.

      **************************************************


This file illustrates the usage of the SETUP program.

(A) There are five items in the main menu.

    (1). Show Configuration 
    (2). Diagnose 
    (3). Change Current Setting
    (4). Utility
    (5). On-line Help

    Press 'ENTER' to choose the item, 'ESC' to exit the 
    program and use 'UP/DOWN ARROW' to scroll the items.

(B) The usage of each item
   
    (1) Show Configuration
        Choose "Show Configuration" to look at the current 
        PCI Lan Card Configuration.

    (2) Diagnose 
        Choose "Diagnose" if you want to verify that your 
        PCI Lan Card is working correctly.

        After entering "Diagnose", there is a sub-menu with
        two items.

             1. Basic Diagnosis
             2. Network Test (Tx/Rx)

             Choosing "Basic Diagnosis" will test NIC registers  
             read/write, cable link status and MII loopback.  
             
             Choosing "Nework Test (Tx/Rx)" will test the normal
             transmission and reception of this Lan Card. In 
             this test, the card need to be attached on the  
             Network.

    (3) Change Current Setting
        Choose "Change Current Setting" to setup new 
        configuration of your PCI Lan Card.

        After entering "Change Current Setting", there is a 
        sub-menu with two items.

             1. BootROM Set
             2. Power Management Function Set

             After choosing "BootROM Set", you can change the
             size and speed of the BootROM on this Land Card.

             After choosing "Power Management Function Set",
             you can change the power management capabilities
             of this Lan card , such as enable/disable the
             capability to receive magic packet. And you can
             set new power state of this Lan Card. 
             
             Note: If you enable the capablity of receiving 
                   Wake-Up frame , you should input a file
                   contain wake-up frame pattern to program 
                   the related wake-up registers on this Lan
                   Card. (To reference wake-up frame pattern
                   , see the sample file 'wakeup.dat'.)
             
    (4) Utility
        After entering "Utility", there is a sub-menu with 
        three items.

             1. Transmit Magic Pkts
                Use this item to send magic packets to wake up 
                another sleeping machine.

             2. Transmit Wake-up Frames
                Use this item to send wake up frame to wake up
                another sleeping machine. Because the pattern 
                of wake-up frame is user-defined, you need to
                input a file name which contains the packet.

             3. Transmit Flow Control Pkts
                Use this item to send flow control packets to 
                another machine.

        
    (5) On-line Help
        Choose "On-line Help" to see this file.








